troubleshooting

Hi everyone. Im new here and i already love the information thats here. I bought a 1988 vmax a month ago with 79k kilometers on it. Since then ive done an oil change, coolant flush, water pump seal replacement and drain cock o-ring replacement (leaking), replaced the push throttle cable (snapped...

Food, etc. on me. Having a problem with the #3 cylinder. Possibly a valve issue?

This is what's happening with my 89. I've been fighting this for a week now. The fuel pump relay basically controls and directs when the fuel pump operates. There are only 5 inputs / 1 output. 1. A hard ground. (input) 2. Power to the relay when switched to reserve. (input) 3. A ground...

My first thread seems to have bogged down, so here goes: My '02 is very hard to start when the engine is hot. Let is sit in the parking lot for 10 minutes or more and it's fine. But try to start it at, say, a long traffic light where you would normally turn the motor off and then the starter...

I'm using the troubleshooting chart, in part D where you test the stator, it says to disconnect the stator from the RR to test the voltage and the resistance of the stator, I have soldered my leads between the stator RR. Do I need to disconnect those wires to get accurate resistance/voltage...