wrong

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. CaptainKyle

    Stunt gone wrong

    http://www.motorcycle-usa.com/905/16802/Motorcycle-Article/Sturgis-Stunt-Goes-Bad--Ewing-Escapes-Death.aspx
  2. C

    So much wrong with this video.....

    http://www.youtube.com/watch?v=t6qu7_-DDgA
  3. P

    Help! Did I put the morley jet kit air corrector in the wrong hole??

    Hi, I just installed Morley Jet kit and now it sucks at higher RPMS, I cant even get to 6000 RPM. I did this while i was cleaning my carbs and my new exhaust hasn't arrived yet, so it's still on stock exhaust. The problem is i read CV carb tuning guide and it says if it doesn't pull well my...
  4. hijacker

    What's Wrong With This Picture?

    Can you spot the 2 things in this picture that caused me a problem last summer? :ummm: Hint: It was a 45mph zone...
  5. Blurr

    I think I'm doing it wrong...

    I bought a 3" over swing arm and extended gas tank along with shocks from Sean awhile back and am installing it. I find that I only have an eighth of an inch between the brake stay anchor and the bottom of the extended gas tank. And that is with the rear elevated off the ground. I cant even...
  6. NHVmaxpower

    WTF is wrong withe people

    Another mass shooting in a elementry school in coneticut its all over the news 27 people killed 18 children. Saying 2 gun men 1 dead 1 in custody. Its a fkn shame people arent safe anywhere these days. What the F**K is wrong with people today??? This makes my blood boil!!!!!!!!!!!
  7. ninjaneer

    Something wrong with your site?

    having problems pulling up the exactrep.com site for the past couple of days. is it down?
  8. KJShover

    When things go wrong

    I totally feel sorry for that guy at 1:10 http://www.youtube.com/watch?v=cnp5Vc4OeiU
  9. dman1961

    I was wrong....

    Although Mr Max needed New plugs and a couple shots of Sea Foam " thank you KJ :punk: " I thought it was running well... I WAS WRONG.... Now it feels like its running on Nitro... Holy Sh$$t....
  10. a113ycat

    Whats Wrong with this Picture!!!

    Addem if you gottem...I found this one
  11. B

    What went wrong with the G2

    There we go again (StarVMax lackeys) ... I really wish this inter forum pissing contest would STOP once and for all... It is completely useless postings like this that gets me scratching my head EVERY single time.... but whatever... RANT Warning!>>>>>>>>> The lack of self-confidence...
  12. ninjaneer

    loud crunch and grind coming out of dead stop

    So after a relatively leisurely drive home from work this evening, I was not but a few hundred feet from the house coming out of a stop when the bike started having difficulty going forward. It kinda felt like I was in some gear other than first--maybe like third. So I tried shifting into first...
  13. ninjaneer

    What's wrong with this picture

    I stumbled upon the following coffee mug and am thinking of getting it. However, there is something wrong with the graphics. Can you pick it out?
  14. K

    Wrong carb needles & PAJ1 jets from factory ?

    Nope... I just realize now that I have a Califonia or "cali" bike; surprise ... surprise !!! Found an earlier post from Sean Morley explaining the differences. My 06, purchased new in Michigan, didn't have the canister attached, but it did have the capped carb port and wire hose holder on one...
  15. npthayer

    Something went wrong??

    So I was installing my new turn signals today and after installing my front turn signals I test them out and they are blinking rapidly. Had the wires backwards. So I switch them around and go to test them out. Next thing you know I get a puff of smoke and now nothing electrical works. Anyone...
  16. Diablotin

    Ricor intiminators wrong size ?

    Hi, We dismantled the fork today and unfortunately the intiminators won't drop in (41mm). The thread on top is preventing it. :bang head: The part of the valve going on top of the damper rod has a 40mm diameter and seems larger than the damper rod. It seems I got the 43mm version even if...
  17. O

    Yamaha valve adjustment chart wrong?

    OK, I'm looking at the Yamaha factory chart for valve clearance adjustment.....the exhaust chart don't make any sense.:confused2: The blank row for measured exhaust clearance which should indicate "normal" range has been observed and thus no shim replacement needed is on the 0.16-0.20mm line...
  18. EAGLEPI

    I can't understand what the hell is wrong

    OK I just installed 4 new plugs and gapped they all the exact same. I put my mufflers back on the outside, ( my new ones should be here Mon or Tues ) I just wanted to see if it was the plugs. I can start it when I choke it it will stay running and it seems to run fast rpms then go back down and...
  19. 4gasem

    Wrong hole?

    NWS http://www.youtube.com/watch?v=-zHVW7Zy_vg&feature=player_embedded
  20. kevman

    WTF Have I done wrong?

    A while ago I did the COP conversion on my 86 Vmax,started it and it idled ok and then died,blew a fuse and I replaced it.Checked all my wiring reread the cop installs and went and started it .Idled ok and started to die so I revved it and it died .one blown fuse and the dreaded smell of burning...
Back
Top