• If you have bought, sold or gained information from our Classifieds, please donate to VMAX Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

2001 Vmax 1300 CC $ 4500 Firm !

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CaptainKyle

Well-Known Member
Supporting Member
Joined
Jun 16, 2009
Messages
7,886
Reaction score
1,754
Location
Maryville , Tennesee
20210317_095525.jpg20210317_095530.jpg20210317_095608.jpg20210315_163220.jpg20210315_163224.jpg20210315_163240.jpg20210315_163303.jpg20210315_163306.jpg20210317_095537.jpg20210317_095537.jpg20210317_095525.jpg20210317_095530.jpg20210317_095608.jpg20210315_163220.jpg20210315_163224.jpg20210315_163240.jpg20210315_163303.jpg20210315_163306.jpg 2001 the bike itself has 16,500 miles The engine was a full rebuild buy Damon F & has less than 5,000 miles on the build nothing really special done to the engine just a basic 1300. FZR 100 inverted front end & FZR rear wheel . Custom built intake by Bryan Nash with a Demon 500 2 barrel carb , Kerker header with HMF can bike runs strong. $ 4500 Firm
 
Last edited:
Nice. The USD forks suit it.
What is the blue painted strip on the right hand side for?

Why paint the front discs!?!?!?!

Looks to have efi - did you do that, if so want to say a few words about it?

Number plate bracket is attached to unsprung component so unless the sheet metal is strong, there is a high chance that's going to break.
 
Nice. The USD forks suit it.
What is the blue painted strip on the right hand side for?

Why paint the front discs!?!?!?!

Looks to have efi - did you do that, if so want to say a few words about it?

Number plate bracket is attached to unsprung component so unless the sheet metal is strong, there is a high chance that's going to break.

Brake stay or exhaust support.

Painting the brake carrier accentuates the rotor friction surface diameter, and subtly draws-attention to the 3 pairs opposed pistons/caliper USD forks/brakes.

It has carburetion, just not stock, no not EFI.
(36) Alleged Morley Muscle | Yamaha Star V-Max VMAX Motorcycle Discussion Forum (vmaxforum.net)

It's a bad sign for the bargain-seekers when Captain Kyle doesn't announce the price in the first post! I have a number in-mind, once he announces the damage this bike will-do to your savings account, I'll tell you how-close I was. In the above link, he does say what 'a price' is, though I'm sure that was before he went through it. My estimate is higher than he said in that thread (above).
 
Last edited:
It has been forever since I have seen an HMF pipe...their 'Big Bird' was the 'go to' pipe for the Gen 1 'Busas.
 
Nice. The USD forks suit it.
What is the blue painted strip on the right hand side for?

Why paint the front discs!?!?!?!

Looks to have efi - did you do that, if so want to say a few words about it?

Number plate bracket is attached to unsprung component so unless the sheet metal is strong, there is a high chance that's going to break.
Blue is the brake stay. Front disc just look better painted than grungy aluminum color in my opinion. The license plate mount has been on it for at least 6 years that i know of with no issues.
 
Last edited:

Latest posts

Back
Top