Does ABS have it's own fuse? Light doesn't go out.
ABS light
- Thread starter ShawnD
- Start date
Help Support VMAX Forum:
child_of_fire
Well-Known Member
Have you tampered with or replaced your tail/brake light recently?
No...just picked the bike up last week. It's done this from the start. If it was something simple I'd do it myself but looks like I'll be taking to a dealership.
Traumahawk
Well-Known Member
Have you put it into the diagnostic screen to see if there are any trouble codes?
Traumahawk
Well-Known Member
Looking in the manual there is a test coupler to tie into the ABS system and read the DTC's. Test coupler adapter 90890-03149 that is disco'd. I wonder if it would be hard to make?
I just asked Sean, and he said that he used a simple jumper (the looped section), should be green wires with stripes. When connected it makes the bike go into test mode.
I just asked Sean, and he said that he used a simple jumper (the looped section), should be green wires with stripes. When connected it makes the bike go into test mode.
Attachments
Not yet...read about the 6-pin connector that needs to be unplugged & I'll do that when I work on putting halos into the scoops.
Loggerslounge
New Member
My abs light blinks intermittently for no apparent reason on my 2015. I just bought it with 9,000 miles last summer, taking it in for 12K service this month.
Similar threads
