Aftermarket levers?

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

timster

Member
Joined
Feb 11, 2018
Messages
7
Reaction score
0
Location
Devon UK
I kept getting a pain in my left hand on long rides.
Today I measured the distance from the grip to the back of the ball of the levers and the brake was 80mm space and the clutch 130mm space!
So im guessing one is an aftermarket one (but which one?), or is this normal?
Either way the clutch one has to be changed, are the any good adjustable ones people can recommend?
Cheers.
 
Picture? The brake side can be adjusted but as you adjust it that just gives slop in the lever. You want just a little slop before it starts pressing on the piston. The clutch side is non-adjustable and will be further out. There are some aftermarkets out there but you have a couple of things to watch out for which are travel length required to fully disengage (many need to be all the way out anyway) and then some are off just a bit requiring shortening of the plunger piston to prevent slight clutch disengagement causing clutch slippage.
 

Latest posts

Back
Top