Any tips for removing /replacing speedo ?

[Maxxxer]

I Have just received a replacement speedo (my origional was clouded and the tripometer didnt work ) is there anything i should be looking out for when removing and refitting ?
any tips or links to assist the speedy swapover would be welcomed .
Thanks

 

[[email protected]]

Pull the headlight from the bucket.

Unplug the turn signals.

Remove the aluminum piece that the turn signal bolts to.

You now have access to the speedo. Disconnect the wiring connector and the cable that goes to the front wheel

Remove the 2 bolts that hold the speedo on. Swap.

Sent from my SM-G930V using Tapatalk

 

[Fire-medic]

Might as well remove and grease the speedo drive cable while you're in there. You also should check the bulbs work before re-installing everything.

 

[Maxxxer]

Thanks