Better fuel lines.

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

82ndCowboy

Well-Known Member
Supporting Member
Joined
Dec 9, 2006
Messages
1,758
Reaction score
41
Location
Osteen, FL
So here's a discussion I've been wanting to have.
I've Started poking around the internet looking for fuel lines that are resistant to ethanol deteriorating them.
Anyone got any thoughts and experience with putting better quality fuel lines on their Max?
 
The standard aftermarket cloth reinforced rubber 1/4" lines you can get at NAPA is fine for ethanol 10%, and should last many years.

Sure, if you want you can fit new reinforced gas lines 1/4" I.D., you can even do the molded T-line that way, but a new one isn't that much $, and I'd say the ozone does-in fuel lines before any 10% ethanol gasoline you may use. And, my experience says, that takes decades.

The U-shaped molded gas line on-top of the gas tank, to the filter, I just use an extra-long length of standard aftermarket 1/4" I.D. cloth-reinforced gas line looped so it doesn't kink to-form the U, instead of buying the OEM piece.
 
Back
Top