Broken Bleeder

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

timscues

Well-Known Member
Supporting Member
Joined
Feb 23, 2011
Messages
370
Reaction score
2
Location
charlotte
Anybody use one of the harley type bleeder repair kits to helicoil in a new fitting. I hace a Buse caliper and the goodrich speed bleeder broke off in the dam caliper?
 
You can't drill the center just large enough to work it loose?
 
Like Jf said ,drill the hole larger, but then get an ease out that will go atleast 3/8" deep into the bleedout and apply pressure. Too much pressure will break the ease out and then it will have to go to the machine shop. Or send it to Sean Morley, he has a good batting average at getting broken parts out............
 
If you have a mig welder mig a beed ontop of broken bleeder enough to grab w vice grips it will come right out. Must do it right away while super hot I've done this many times over the years on cars n it works every time. Just make sure your welding bleeder only or you'll be screwed meaning don't weld bleeder to caliper. It won't work if bleeder are aluminum.
 

Latest posts

Back
Top