Can you guys identify this speedo and tach?

[frank5079]

https://www.youtube.com/watch?v=O1To9EwSIDE

I like that!!!

 

[hellyear]

nice bit of gear :eusa_dance::eusa_dance:

 

[hellyear]

The motoscope light is a long proven and very robust digital instrument billet housing.

http://motogadget.com/de/digitalinstrumente/digitales-dashboard-light/motoscope-light-10.html

very xey at 350 yuros


The motoscope light is a compact, lightweight and reliable digital multifunction instrument.
motoscope light offers multiple functions in one small, precise and attractively styled instrument.


The case
The high quality aluminum casing is milled on CNC machines from solid and its surface anodized black or silver. Even a highly polished version. The housing is reliably sealed and protects all electronic parts against weather, water and dust.


The LED indicator and the LCD display
The speed is easily ascertainable by a band of 39 ultra bright LEDs. By means of a photodiode is adapted automatically to the ambient light, the light intensity of LEDs. The exact numerical speed value can also be displayed on the LCD. The freely adjustable limit speed ('red area') is indicated by an ultra-bright red LED on the speed tape.
permanent The backlight of the LCD and the large digits provide excellent readability.


Operation
With a menu button or as the headlight flasher switch on the handlebar switch between the displays.
The default display on the LCD is the current speed. Other values ​​can be retrieved by pressing a key on the display if necessary.
presets or stored values ​​remain stored naturally also without power.


Cultivation
by small dimensions and a neutral, elegant design of the instrument you light on almost all motorcycles easy to install. By three threaded holes (M4) on the back of a stable attachment is ensured.


Sensors and cables
Simple wiring and detailed installation and operating instructions make the connection of the instrument easily.
The connection cable has a length of about 55 cm and is usually sufficient to give the corresponding connection points. The cable for the speed measurement is simply connected to the ignition coil or ignition box.
Reed Contact included for speed measurement and the odometer is mounted eg on the fork leg.


Delivery
motoscope light with approximately 55 cm connection cable, speed sensor M5 x 0.5 Fine thread (VA, IP67) with 150 cm cable, 2 magnets, 6-pin connector kit, mini switches, fuse, detailed installation and operating instructions.


Technical data and functions
length, height, depth: 120 x 57 x 30 mm,
Weight: about 215 g
Operating Current: 140 mA - 400 mA (max.)
Power consumption in standby mode: 0 mA
Operating voltage: 9 V - 18 V
Operating temperature: -15 ° ... + 50 ° C

Function Measuring range
Tachometer (LED strip) 0-8, 10, 14 krpm
Speedometer 0 - 350 km / h o mi / h
Tripmeter to 999 km or mi
Total kilometers freely adjustable to 250,000 km or mi
Boundary setting speed 0-20000 rpm
Tachometer (on LCD) 0-20000 rpm
Travel time display 0 - 99:99:99 h / min / s
Board voltage 9 V - 18 V
instantaneous acceleration (-15.0) - 15.0 m/s2
Average speed 0 - 350 km / h o mi / h
Time measurement from 0 bis 100 km / h 0,0 sec. - 99.9 sec.
Maximum speed 0 - 350 km / h o mi / h
Maximum speed 0-14000 rpm
max. positive acceleration 0 to 15.0 m/s2
max. negative acceleration 0 - (- 15.0) m/s2
Switching power output max. 2 A
Gear indicator 1-6, appears when activated, always next to the speed

 

[frank5079]

nice bit of gear :eusa_dance::eusa_dance:

Thanks, Bud!!! I like that!!!

 

[wildweasel_pt]

If you like that take a look at the motoscope pro and that IS the deal... A bit expensive though, but has all the goodies...

 

[frank5079]

If you like that take a look at the motoscope pro and that IS the deal... A bit expensive though, but has all the goodies...

Not that impressesd with that one as I am...

this one.

 

[one2dmax]

We used that setup on the Reaper build. Slick setup for sure.