Contact Damon on here, he has a few videos which will save you $, I believe he sells them on ebay. Search under 'members' @ the top of the page.
I use K&L float needles, you can buy 'em from ebay # 18-8944 is the part #. Or, order directly from K&L. Parts Unlimited also has a good kit:
https://www.parts-unlimited.com/bro...VCIDGzvU0/HMmlHi+AOD6Pik=#partNumber-10030367
The advantage of this Parts Unlimited kit is it has the jet block gasket, the needle valve and seat, various O-rings (including that tiny one-part #10 underneath the CV carburetor cap for the diaphragm slide, next to the pilot screw-part #22, fiche, below), a carb float bowl gasket, and the enrichener body gasket-part #17. 1985-2007, all the same. If you ordered these separately from a dealer, it would cost you >2 times this Parts Unlimited kit's price. I usually buy OEM stuff, but I've had good luck with the Parts Unlimited carburetor parts on multiple bikes.
2006 Yamaha V-MAX 1200 (VMX12V) Carburetor | Ron Ayers
Prices you would pay separately:
Gasket for the enrichener body (choke plunger/piston)
3JB-14536-00-00
Retail Price: $12.99
Your Price: $9.09
Gasket for the float bowl jet block
3JB-14199-00-00
Retail Price: $21.99
Your Price: $16.34
Needle Valve Assy for the carburetor float, not including the plug/cap and its O-ring, which you knock-out to remove/replace the needle valve seat
1FK-14190-15-00
Retail Price: $28.99
Your Price: $26.72
O-Ring for the float bowl-gasket
22V-14147-00-00
Retail Price: $21.99
Your Price: $16.31
O-Ring for the main nozzle
22U-14147-00-00
Retail Price: $5.99
Your Price: $4.37
There are several other O-rings I didn't list, but that partial $ list is at $69, so you see that the K&L kit saves you $.