Changing cans

[wiretwister]

If I change the can only on my 4 into 1 header ......will it require a re-jet ??

Thanks

 

[gamorg02]

probably not. the changes might only be minimal enough to be picked up by a o2 sensor. how big of a change on your can?

 

[KJShover]

If I change the can only on my 4 into 1 header ......will it require a re-jet ??

Thanks

I doubt it.

I changed from a 12" supertrapp with 12 discs, to a 18" kerker carbon fiber, then cut the kerker to 14" then 12" all with no noticeable ill effects. NOTE: the exhaust note it has now is not an ill effect unk: lol

 

[wiretwister]

Im thinking 4 to 6 inchs shorter, not sure exactly what would look best.

 

[one2dmax]

You're D&D can would look ten times better shortened up too! As noted you should not need to worry about any jetting changes with the muffler change.

The Hindles were available in the big tube version which has 2.5" midpipe and the standard version which was 2.25 or 2" (can't remember at the moment).

Sean

 

[wiretwister]

So, whats the trick to cutting one back..........Cut and weld ?? Do tell.

 

[SpecOps13]

Cut straight, Drill in the right places and Screw it. normally...

Good Luck, It should sound Awesome with a shorter can...