December 2018 Race Tech VMax suspension products and info

Discussion in 'Suspension' started by Fire-medic, Dec 21, 2018.

Help Support VMAX Motorcycle Forum by donating:

  1. Dec 21, 2018 #1

    Fire-medic

    Fire-medic

    Fire-medic

    Well-Known Member

    Joined:
    Mar 25, 2011
    Messages:
    8,763
    Likes Received:
    34
    Location:
    Miami Florida
    Here's a link to Race Tech to show their current tech info and suspension products for the 1993-07 bikes, you can also pull-up the info for the earlier bikes.

    http://racetech.com/ProductSearch/12/Yamaha/VMX1200 V-Max/1993-2013

    Of-interest is the replacement fork tubes, including an option for Titanium-nitride coated ones, which aren't cheap.

    Just the service specs is a good reason to bookmark the page.
     
  2. Dec 21, 2018 #2

    mabdcmb@yahoo.com

    mabdcmb@yahoo.com

    mabdcmb@yahoo.com

    Well-Known Member

    Joined:
    Jun 15, 2008
    Messages:
    6,108
    Likes Received:
    19
    Location:
    Pittsburgh, PA
    Nice info.
    Not sure what this is about though?
    "Requires (2) FPSS 03 spacers to install RT springs (only one comes in spring kit) - 1994 V-MAX Requires a custom spacer RT only."
     
  3. Dec 21, 2018 #3

    Fire-medic

    Fire-medic

    Fire-medic

    Well-Known Member

    Joined:
    Mar 25, 2011
    Messages:
    8,763
    Likes Received:
    34
    Location:
    Miami Florida
    The best thing to do is to contact them to explain the comments. If you looked at the harding, they talk about "1993-2013" models, which as we know, should stop at 2007 and begin for the Gen II at 2009.
     

Share This Page

arrow_white