Easy Rear tail light and licence plate mod

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sweatysac

Member
Joined
Aug 10, 2014
Messages
8
Reaction score
0
Location
Blainville
Here is a little mod that I find beautiful, costs only 30$ and takes 30 minutes to do!

20150829_171822 (1).jpg
 

Attachments

  • Screenshot_2015-12-22-10-00-10.jpg
    Screenshot_2015-12-22-10-00-10.jpg
    19 KB · Views: 194
  • Screenshot_2015-12-22-09-57-35.jpg
    Screenshot_2015-12-22-09-57-35.jpg
    20.7 KB · Views: 185
  • Screenshot_2015-12-22-10-01-12.jpg
    Screenshot_2015-12-22-10-01-12.jpg
    20.7 KB · Views: 174
Last edited:
attachment.php


Yep, I like it too.
 
I like this way better than the OEM. I run bags when cruising, and the lollipops were too much in the way. The integrated light was something I had planned for a long time. It cleaned up the bike a lot. All you need to do in cut a few inches off the inner fender and silicone it in. You can't pull it off. Wiring requires two ballast resistors in parallel for the turn signals.
Steve-o
 

Attachments

  • user2101_pic7295_1357063596.jpg
    user2101_pic7295_1357063596.jpg
    67.7 KB · Views: 101
  • after.jpg
    after.jpg
    75.9 KB · Views: 106
Last edited:
Looks good.
I took the easy way and just replaced the stock light with a 60 LED Cateye.
 

Attachments

  • 60-LED_cateye-tail-light.jpg
    60-LED_cateye-tail-light.jpg
    183 KB · Views: 80
Looks good to me Dennis, and way better than that stocker.
Thanks !
I agree, I'm definitely happy with it.
It's a Lot better looking that the stock "Brick" tail light and it's a Lot brighter too.
 
Back
Top