Flywheel bolt

[tddaniel11]

Thanks for all your help maxers! still fighting this repair/ Shouldn't this just screw in easy without flywheel or starter clutch attached?

 

[MaxMidnight]

Assuming both male and female threads are not damaged or there is debris in the hole then yes.
It would help if you described what the problem is.

 

[tddaniel11]

Puller stripped crankshaft threds

 

[Pighuntingpuppy]

If thats the case, you may need to heli-coil or threadsert the crank. Either one of these involves drilling out the stripped threads, installing the threadsert/helicoil and moving on with life.

Doing this repair, you will need to make 110% sure you keep the metal from entering the engine.

 

[putin]

Puller stripped crankshaft threds

May be just the bolt deformed. Did you try to screw any right size metric bolt inside?