Front Brake

VMAX  Forum

Help Support VMAX Forum:

Bad Max

Active Member
Supporting Member
Joined
Dec 1, 2021
Messages
41
Reaction score
15
I had my front brake lock-up on me to the point that the wheel was locked.Any ideas why? Ihave bleed the system and now no fluid out of the bleed nipples .This is a new res and master.
 

Equanish

Well-Known Member
Joined
Apr 6, 2017
Messages
135
Reaction score
21
Location
Richardson
I had my front brake lock-up on me to the point that the wheel was locked.Any ideas why? Ihave bleed the system and now no fluid out of the bleed nipples . This is a new res and master.
Why is it a new res and Master?
What brought that on?
 

Dansmaxresto

Well-Known Member
Supporting Member
Joined
Apr 17, 2021
Messages
171
Reaction score
154
Location
Cincinnati, Ohio
Stuck caliper and/or degrading brake line. Mine did the same thing. Take caliper apart and clean piston really good. Then replace brake lines. I prefer steel braided but OEM will work too. Rubber brake lines can deteriorate on the inside and not let fluid release when you release the lever. I had this happen on two cars also.
 

Zeus36

Well-Known Member
Joined
Jul 1, 2015
Messages
927
Reaction score
255
Location
Ventura, CA
I had my front brake lock-up on me to the point that the wheel was locked.Any ideas why? Ihave bleed the system and now no fluid out of the bleed nipples .This is a new res and master.

Did you flush the old fluid out of the system when you changed the master? Brake fluid will absorb moisture and over time can turn to micro steam under hard braking. This can cause the caliper to lock up. Also recommend doing a reverse bleed on the brake lines to push any air up towards the master. See Fire-medic's post here: brake bleeder syringe to make
 
Top