Furukawa connectors

[davidon]

Anyone know how to remove wires from one of these connectors?

 

[blaxmax]

Anyone know how to remove wires from one of these connectors?

Is it the 2 wire that goes to a coil on plug?
http://www.cycleterminal.com/terminal-extraction-procedure.html

 

[davidon]

Is it the 2 wire that goes to a coil on plug?
http://www.cycleterminal.com/terminal-extraction-procedure.html

Awesome..thanks a bunch

 

[Bill Seward]

I messed up a set of regulator plugs, trying to get them apart (because I didn't trust the solder joints and wanted to redo them) for a MOSFET unit for my Roadstar. I wound up just using individual connectors for the input and output terminals, soldered of course, plugged them in, and filled the cavity that the plug went into with epoxy. I use PosiLock connectors to attach the regulator to the stator and battery, so if the regulator ever fails, just toss it out, and easily replace it. However, if I ever need to replace another regulator, I will get new Furukawa connectors, and do it properly.