Gen 2 engine idle

VMAX  Forum

Help Support VMAX Forum:

sinder70

New Member
Joined
Jan 19, 2013
Messages
4
Reaction score
0
Location
maricopa
I have a 09 gen2 Vmax with an idle problem. It been decat with Voodoo exhaust. Gured by Tim Nash. It’ll idle at 1400 rpm. If I pull the clutch in and come to a stop, abruptly, the idle will come down to 1100 rpm. I put it in neutral it will idle at 1000 rpm like it’s suppose to. The bike had the service bulletin done to it for the 3000 rpm electrical problem with the new bypass sub harness. I bought the bike years, ago, I can’t remember if it did this in stock form. Input would be appreciated.
Thanks,
Mark
 

sinder70

New Member
Joined
Jan 19, 2013
Messages
4
Reaction score
0
Location
maricopa
I’ve check them. There synced.
I looked at a service manual and it said a front bypass air screw should be painted white for reference. The bypass air screw painted white on mine is the right rear cylinder. Is the actual reference bypass air screw on one of the front cylinders? If so which one?
 

Latest posts

Top