Hey WFCALL, where does the rear brake/signal lights come from? Looks like what I'm looking for.
Mike
The brake/running light is from custom dynamics. It's the half moon cateye or whatever they call it. Took a lot of hacking and chopping to get rid of all the clat and mount it up. It's not a Max specific product but fits well and is extremely bright. it has also lasted 2 years so far with no led failures, wish I could say the same for my boogie light leds, they have been plauged by led failures since day one.
The turn signals are mini LED signals from a local shop that had the typical 3/8" stud on them. Paid about $30 each for the signals and I think the brake light was around $130
Mounting the signals was a little more complicated as I used a piece of 1/2" stainless tubing, drilled some holes in the center to fish the wires out of and another hole to put a 6/32 bolt through for mounting and then pumped the whole thing full of Devcon 5 minute epoxy before pushing the studs on the signals down inside the tubing.
Both lights and turns are bolted/mounted to what little bit I left of the metal mudguard piece hanging down underneath the fender. The rest of it that used to hold the old light and license plate I sawed off with a sawzall. The plastic piece that holds the old tailight went in the garbage.
No modifications to the plastic fender were needed.
Rusty
