Help Tail light wiring issue !.2001 vmax 1200

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GreenfieldMad

Active Member
Joined
Nov 11, 2022
Messages
28
Reaction score
5
Location
Greenfield, canada
Have everything working with the wiring except for 1 thing .

The dredded tail light..
It has been swapped by previous owner from the factory tail light to one of the common led 3 wire plug and play lights . ( was never installed but was intended to be .)

I have the rear signal lights working properly and everythingup front working properly. But the brake / tail light will not light up.
Not functioning as either brake nor tail light.

When i connect the battery to the tail light alone by utself it works . But not when hooked to harness .

Any ideas or things i should know or tips . Ect.?? Any help would be appreciated 🙏

Thanks

GFM16787250899336734373487340405406.jpg16787251085791109667141049404499.jpg1678725127398201564845893597546.jpg16787252697363857449599304363895.jpg
 
I have rewired the back of this a second time with all new conectors and new wires . Just be sure the connections are good and it still doesn't work.. :(
 
Well, the simple 'fix' would be to re-wire the OEM light back in-place, and see if things change for the better. If that works OK, then I think the unit you've tried to install is defective, probably in its circuit board.
 
Hey fire medic thanks for fast response buddy . Im looking now and seeing that the one that was there before this one ...was also an led upgrade with the same wire color pattern as the one i have here
 
I'm sure that you can parallel-wire up that one and see how it operates, or doesn't. Let us know.
 

Latest posts

Back
Top