ISO grips

[RMax]

How do you remove the end weight off of the ISO Grips besides the 4 small allen screws?

 

[one2dmax]

I thought it was just the 4 screws but not sure what's in the center of that one? I know they used to have a center option that would let you have a helmet lock from there.

 

[RMax]

Did some researching, it appears that the bar end might be lidlox for a helmet, unfortunately I have no keys. I will remove the 4 screws again and tap the bar end with a rubber mallet, hopefully they come right off.

 

[Parminio]

Now is a good opportunity to try out that new DeWalt brushless drill and carbide bits.

And if you do not have that, it's a good opportunity to buy it.

 

[Woody]

Now is a good opportunity to try out that new DeWalt brushless drill and carbide bits.

And if you do not have that, it's a good opportunity to buy it.

That could be a good topic.
Who uses what brand of cordless tools?


As far as the bar end. Try twisting the entire end. Counter clockwise.
If it loosens up a little. Push in.then pull.

 

[RMax]

Thanks everyone, I was able to twist them off.

 

[RMax]

Since I didn't have the key, I decided to drill them out and use them for my bar end mirrors.

 

[Parminio]

Hang up your jacket!