Jetting thanks

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tinman22

Well-Known Member
Joined
Oct 16, 2015
Messages
408
Reaction score
121
Location
Toledo
Just wanted to thank all who helped with my carb issues. I went with the mic 150 mains and stage 7 needles on the 2nd notch from the blunt end stock paj 1/2 drilled slides and dyno jet springs. I also reinstalled the vboost and synced the set with a digisync. The Only change from what was recommended was the change too the 2nd clip on the needles on the 3rd clip it bogged really bad and rattled the carb slides.
Now It pulls good and for the first time I can make the oil light come on. It also leaves nice black marks through 3 gears . Thanks.
Now the seat.
 
I'm hoping to get on the dyno in Fremont indiand in the next couple of weeks and see what it makes. Trying for one teens
 

Latest posts

Back
Top