Launching the Gen 2 at the strip-videos or tutorials

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1badmax

Well-Known Member
Supporting Member
Joined
Jul 19, 2020
Messages
431
Reaction score
298
Location
Tulsa, OK
I wanting to get my 16 to the local track to see what it will do. It's been many years since I had my 85 Max and 01 CBR 1100XX on the strip and I know the key is getting it off the line without spinning or bogging too much. Anyone know of any videos or tutorials on the Gen 2 in launching it, I have gone through Dale Walker's documents on the Gen 1, which some things pertain but as most know the Gen 2 is a totally different bike. TIA
 
Very similar to the gen 1. But, have you reflashed your gen 2 yet? If not you will have a little tougher time overcoming bog since the throttle only gives 50% to the bike of the users input.
 
Very similar to the gen 1. But, have you reflashed your gen 2 yet? If not you will have a little tougher time overcoming bog since the throttle only gives 50% to the bike of the users input.
Yes, reflashed, MAB, Akra mid pipe with stock exhaust, DD to clutch. Thanks Sean
 
Back
Top