Little Red Light Added to Gen 1 Gauge Cluster... Not sure why?

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VBurr

Member
Joined
Aug 24, 2021
Messages
15
Reaction score
6
Location
Navan, Ontario, Canada
Bought my V-Max in August. I noticed that the previous owner did two little electrical mods. The first was simple to figure out. A bypass toggle switch was added on the side of the bike to manually start the cooling fan. Not sure why since the bike runs cool and the temp sensor does engage the fan at about 3/4 on the gauge. The other mod is a mystery. See pic. Before I start digging in and pulling the bike apart to follow wires, I was wondering if this could be some sort of common electrical mod others may have seen before?IMG_2447.jpg
 
Last edited:
Could be. New to the bike so I hadn’t yet looked down when it kicks in. Next ride I’ll check the light at 6k rpm. Thanks.
 
Thanks to all, I have a few leads to follow now.
I hope you mean that literally as by knowing what each lead connects to, it will be easier to figure out.
 
Back
Top