Loose clutch lever ?

[gunrunner]

Was riding home from work today minus gloves so had left hand down by motor and noticed that my clutch lever was going all over the place . Checked it at home and it moves about an inch inwards and about half an inch up and down , is this normal give for this ? Also sometimes bike has trouble engaging in gear when down changing from 3rd to 2nd as it starting clicking etc when this happens, i usually pull clutch all the way in slowly and change . So im thinking is this as my clutch lever is to loose etc ?
If so what do i do ? If not what could it be ?:confused2:

 

[Buster Hymen]

Mine is loose too. There is a bearing mod where you put in a bearing for the pin holding the clutch lever. This takes out all the play. I will see if I can find the details of that mod again.

 

[maxcruiser]

Here's a link to the clutch lever mod;

http://www.vmaxforum.net/showthread.php?t=2357&highlight=clutch+lever

Mike