New exhaust coating

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looks good. We have a local branch in Davie FL, home of the Miami Dolphins training facility, where they practiced the 'hook & ladder' to use on the Patriots today.
 
I guess the canister wasn't done by Jet Hot, just the pipes? The canister looks like polished aluminum while the pipes have the JH appearance.
 
I didn’t do the can, want sure what I was going to do with it, I’m going to polish it myself if that doesn’t work I’m gonna try a carbon fiber muzzy. Wish I took before pics. It was all there just nasty and rusted and had a dent I repaired.
 
That turned out great. For any of you who don't want to refurbish your current exhaust system, Voodoo Exhaust is made from stainless steel and will never rust.
 
I didn’t do the can, want sure what I was going to do with it, I’m going to polish it myself if that doesn’t work I’m gonna try a carbon fiber muzzy. Wish I took before pics. It was all there just nasty and rusted and had a dent I repaired.
You could drill out the rivets and buy a carbon tube and use the parts you have to make your own CF muffler.
 
20181222_171713.jpg
That turned out great. For any of you who don't want to refurbish your current exhaust system, Voodoo Exhaust is made from stainless steel and will never rust.

They are high quality. I was at a friend's shop, one of the guys had a VooDoo exhaust on his Hyabusa, it sounded "all-about the business." It's pretty blinged-out, take a look. A single sided swingarm & a 280/35 tire are the main additions besides the paint job which probably cost more than any VMax I own. The seat is alligator and has an unusual addition to it.

I got an Akrapovic carbon fiber exhaust canister for my use, but haven't installed it yet. I'm still running my "Frankencanister" on my '92. I can run my Stage 7 and still be quiet which makes for a stealthly-disguised (quiet) ride. That's very different from my UFO 4/1 Dragstar full system, whose pipes I still use.
 

Attachments

  • 20181222_164331.jpg
    20181222_164331.jpg
    155.1 KB · Views: 23
Last edited:
Looks great. I just got a phone call, that the Hindle 4-1 for the 2011 is done, so i just need to pick it up when i get back in. I will post pics after i get it on.
 
Brother Poolio; How did you get it so cheap? I just got a quote of $238 with return shipping for kerker header only. No tail pipe or can. Header is in good condition just chrome is burned off bottom of rear cylinders tubes.
 
Brother Poolio; How did you get it so cheap? I just got a quote of $238 with return shipping for kerker header only. No tail pipe or can. Header is in good condition just chrome is burned off bottom of rear cylinders tubes. Is yours the polished 1300 ?
PS it looks better than new
 
It’s ceramic coated. They did my sons ninja also. Exhaust looks and sounds killer. I didn’t have them touch the can
 

Attachments

  • AFC81D62-8649-487B-96C5-CAC2B56B6B2F.jpeg
    AFC81D62-8649-487B-96C5-CAC2B56B6B2F.jpeg
    201 KB · Views: 24
  • 6E10F934-D072-4697-906A-95F0232B365E.jpeg
    6E10F934-D072-4697-906A-95F0232B365E.jpeg
    111.5 KB · Views: 25
Polished the front wheel too! Six pots fresh back from powder coating and assembled. Waiting for pro bolt banjo and bleeder valves
 

Attachments

  • 1785D30F-918B-42E0-A976-E78BF4838FBF.jpeg
    1785D30F-918B-42E0-A976-E78BF4838FBF.jpeg
    141 KB · Views: 17
  • 6255499C-70A1-4814-AA9B-BAC430EFC998.jpeg
    6255499C-70A1-4814-AA9B-BAC430EFC998.jpeg
    88.8 KB · Views: 16

Latest posts

Back
Top