1st Gen V-Max New member - Vmax rebuild

[GMac]

VMax Year

1985

Hi Folks, I have just joined the group and am looking forward to chatting about all things VMax. My hobby is doing up old motorcycles and have just bought this 1985 VMax with VBoost. It is unregistered, had rats living in it when I bought it and hasn’t been started for about 15 years. Preliminary investigations suggest it will polish up well but will need an engine strip down and a lot of cosmetic work. Sounds Great!!!!

This is my first VMax and so be prepared for a number of questions.

All the best and talk soon

Graham

 

[CaptainKyle]

Welcome and good luck with the project

 

[Dkid]

Welcome to the Classroom. Good Luck and the rebuild. Good choice!!

 

[Fire-medic]

http://vmoa.net/VMX12-Service-Manual01.pdf This will be of great help to you

.

 

[TK3333]

Welcome to the forum. The search feature will be helpful as alot of things are already covered in detail. You could also add your 85 to this list.

oldest surviving vmax....

4120 - Driver - Stock Done last year

www.vmaxforum.net

 

[one2dmax]

Why does the engine need stripped down?

 

[GMac]

I took the carbs off and they were full of what looked like brown honey. I assume this is what 15 year old fuel looks like.

I was thinking the engine should be stripped to replace rubber seals etc. the engine turns over fine and there is no corrosion in the cylinders.

Would you suggest leaving the engine intact and just checking over the clutch, and water pump ?


It would save a lot of bother if I don’t have to strip it.

Thanks

Graham

 

[Fire-medic]

I'd just get it running, and see if it springs any leaks of oil, coolant, brake fluid, etc. Doing the brakes & hydraulic clutch is always a good idea, and can be done on a non-operational bike.

Clutch/Brake fluid

With speed bleeders you wouldn't even need the wife :) You could just trade her in! :rofl_200:

www.vmaxforum.net

Another 'Clutch Not Disengaging' Thread

Hate to beat a specific topic like a coked up monkey on a snare drum... and I've searched the forum and found lots of great advice and tried some things and I'm right back to square one. Obviously.. the clutch doesn't seem to be disengaging all the way (Or at least as much as I seem to think it...

www.vmaxforum.net

Just an idea

Thanks to all that took the time to document how to repair different systems, its a very helpful section in this forum. I would like to suggest a subsection of (Symptoms of system failure), by that I mean documenting the symptoms & signs of components failure, like starter clutch failure...

www.vmaxforum.net

 

[GMac]

Thanks, I think that sounds like good advice. It did have some oil and coolant in it and neither were contaminated and so fingers crossed, it will fire up OK.

It will save a lot of work.

Thanks for your help