O ring size on inlets
- Thread starter Fab333
- Start date
Help Support VMAX Forum:
They are really-thin, and fairly large diameter. Sorry, no generic info. Order 4 and replace all of them at the same time. You could measure 'em before installation if you wnated to try & source 'em generically.
- Joined
- Dec 25, 2021
- Messages
- 91
- Reaction score
- 73
I bought them recently in a shop, will let you know the specs today.
- Joined
- Dec 25, 2021
- Messages
- 91
- Reaction score
- 73
Coming up with the specs of the O-Rings.
inner diameter: 46 mm
thickness: 2 mm
I replaced them with inner diameter of 45mm and a thickness of 2,5mm
original number: 93210-45578
I hope, this info is of help for you
Fab333
Active Member
thanks joksi, thats exactly what i needed so i can buy them from my bearing shop and have them ready when i pull my engine apart.
- Joined
- Dec 25, 2021
- Messages
- 91
- Reaction score
- 73
@Fire-medic
I have a (more or less) complete list of all O-Rings with their sizes - if you could need it. Warning: its from our German group, so the wording is in German.
I have a (more or less) complete list of all O-Rings with their sizes - if you could need it. Warning: its from our German group, so the wording is in German.
Sorry to but in - I'd be interested in that if I may.
Fab333
Active Member
yes please, when you get a chance
- Joined
- Dec 25, 2021
- Messages
- 91
- Reaction score
- 73
I'll take a copy? [email protected]
- Joined
- Dec 25, 2021
- Messages
- 91
- Reaction score
- 73
Sure guys. I will send out the email with the file today.
barber1303
Well-Known Member
Could you post it here?
Me to [email protected]
barber1303
Well-Known Member
Did anyone get a copy of this o-ring list? If so, I'd really like a copy. Thanks!
I have & translated it into English. As OP didn't post it publicly I will not either. PM me.
Similar threads
