hello my friends , i need your input. today i just checked after a ride for no reason the oil sight glass and i noticed that the oil sight glass was full. i also noticed in my clear clutch cover oil with a very little angle of the bike toward the clutch cover oil splashing on the glass (to see the oil on the glass i had to angle the bike more than today) i changed the oil when i replaced the middle gear and it was in the middle of the sight glass. how now it is full. i took half ltr out with a syringe from the oil filling plug and to get the oil to the middle of the glass. now i see it splashing when the engine is running. i have the kawa oval or-ring with a engine saving bracket. also my pressure gauge when hot shows normal pressure 6000 rpm about 60psi when cold reaches about 72 psi at 2500-3000 rpm.