fmcandrew
Well-Known Member
Quick tips for disassmbling post 1993 forks (just did it because I want to PC my lower tubes & seals are leaking)
- Leave the springs in under pressure...every shop I talked to does it this way
- Get an impact gun (air or electric)...I used a cheap Sears electric impact gun and it worked well
- Use a 3/8 hex bit. All the posts suggest creating a tool or buying a long hex bit to reach the deep bolts...I used a 3/8 stuby hex on a 3/8 extension with a 1/2 to 3/8 adapter - it fits and mine popped out just fine (these were never removed previously - bike is a 1995). The 3/8 hex bits can be purchased anywhere - cheap
- Like Sean points out in his video...pull down on the lower fork tube while removing the bolt...just ads more pressure to the bump stop thingy
- Worked swell for me...best of luck to you all