Rear shock top adjuster problem

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eric Cunningham

Well-Known Member
Joined
Aug 14, 2019
Messages
93
Reaction score
36
Location
Johns Creek, Ga
I noticed my left side damper plastic adjuster was spun off the numbers and I cannot get it back to the 3 position. What's the technique to reposition it to the usual number? TIA
 
Not sure if it makes a difference, but try setting spring preload to the lowest setting.
 
Yesterday I had the same problem. It was impossible to move, locked at 4 and trying to get into point 3.
Carefully, pressing down a little, I was able to move it, now it is normal
I hope you made it and I hope it doesn't lock again, it doesn't look like a heavy duty piece.
 
it was careful but not so much 😌... some force to unlock without breaking ...
Fire-medic gives a good solution, it was the first thing I thought, download the shock absorber and try.
 
The factory service manual warns about turning the damper adjustment collar to beyond the #'s in either direction.
 
Back
Top