Removable rear wheel stand

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan Lee

Well-Known Member
Joined
May 4, 2020
Messages
64
Reaction score
9
Location
Berthoud, Colorado
Has anyone come up with a good idea on a removable rear wheel stand that will work on a Gen 1 Vmax. My bike has a kerker 4-2-1 exhaust, previous owner removed the center stand, since this bike has no place to install bobbins, makes it a little difficult, thinking of using a heavy duty steel rod and goIng through the axle, since it is hollow, maybe fab up a bobbin set up that is removable if rear wheel needs to come off.
 
I have spool nuts to replace the lower shock nuts. This works for stock wheel/tire combo's but not the 180-200 wide tire combo's.
 

Attachments

  • Stainless Swingarm Spools.jpg
    Stainless Swingarm Spools.jpg
    78.4 KB · Views: 22
Sean,
I would like to buy a set from you, do you have a link? I looked on the web site, but didn't see them

Thanks
 
Back
Top