Ted Drum
Active Member
Can not find on internet Starter rebuild kit for a 4 brush Mitsuba SM13275 starter
Thanks Ted Drummond 95 Vmax 30,000 19,000 miles
The starter was working fine, just a clean up
Got the brushes from Ricks only to find out they are no longer in length than the original brushes and do not come with the brush plate. Cleaned up the armature put the old brushes and plate back in. Installed a Jell pack battery 10 years ago that solved all the hard starting when hot. I disconnect the cables for storage and never use a battery minder or charger on the battery. Just hook the cables up 6-7 months later and start the bike. Bike is stored in a garden shed with small heater to raises the temp 2 degrees above out side temp, no surface rust in 18 years.
Thanks for the help
Thanks Ted Drummond 95 Vmax 30,000 19,000 miles
The starter was working fine, just a clean up
Got the brushes from Ricks only to find out they are no longer in length than the original brushes and do not come with the brush plate. Cleaned up the armature put the old brushes and plate back in. Installed a Jell pack battery 10 years ago that solved all the hard starting when hot. I disconnect the cables for storage and never use a battery minder or charger on the battery. Just hook the cables up 6-7 months later and start the bike. Bike is stored in a garden shed with small heater to raises the temp 2 degrees above out side temp, no surface rust in 18 years.
Thanks for the help
Last edited:
