Sticky carb sliders. I just rebuilt carbs!!!

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DreamV4

Well-Known Member
Joined
Jun 30, 2021
Messages
1,047
Reaction score
279
I probably didn't install 2 of them right.
I took one out, didn't find any problems, put it back, seems to be working fine. What did I do wrong?
 
Incorrect orientation, there is a small half circle on the edge of the rubber diaphragm that engages in a slot in the carb body or the spring not seated properly?
 
Some dust was falling from air box on sliders. I took box apart and cleaned
 

Latest posts

Back
Top