stripped allen head on cylinder for coolant plate

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VmaxRider85

Well-Known Member
Joined
Mar 3, 2012
Messages
87
Reaction score
0
Location
Clifton Park NY
how do i get this out ?

i tried and EASY OUT didnt work..

i dont know what to do

im afraid to drill anymore espically with a bit on the cylinder


HELP!!!!!!!!
 
Even a cellphone pic if it is clear is better than no pic. Whadd'ya got?
 
Just drill the whole thing out and replace with grade 8+ parts from local hardware store.
 
Its the side cylinder plates where the coolant can be drained from the water jackets on the cylinders... That screw shouldn't be hard steel so you need to be very patient when drilling it off or the drill bit may swerve off to the case and its gonna mess it up...
 
took my time use a nice sharp drill bit went very slow was able to break the head off and the plate came right off and able to unscrew the treads by hand PROBLEM FIXED !!!!
 
Always use a hand impact with socket bit when getting those off!

Sean
 

Latest posts

Back
Top