Think I solved some issues tonight

[Olds Guy]

Well the bike was turning over hard...maybe this?

Tire rubbing the swing arm....missing a spacer???

What does this wire go to??

Thanks for any help!!

 

[Traumahawk]

Which side of the tire is rubbing...right or left?

 

[Olds Guy]

Rubbing on the drive shaft tube.

 

[davesax36]

That looks like the right washer behind the axle nut, though. It won't work if you try to put that one in the final drive as the washer swap.

 

[MaxMidnight]

What does this wire go to??

It's from the neutral switch - you will find a matching sky blue (Sb) in the loom normally adjacent to the battery.
See attached PDF.

 

[VegasVMax]

What is the size of the tire you have?

 

[Olds Guy]

It is a 170/80x15. I have not torn the rear apart yet as I need to put the front of the bike back together first. I am sure they left out the spacer completely as it is not on the other side either.

 

[VMAX1260]

when i had the stock wheel and run 170/80x15 had no issues with tyre rubbing. see the diagram to see what is missing

 

[Olds Guy]

when i had the stock wheel and run 170/80x15 had no issues with tyre rubbing. see the diagram to see what is missing

Thanks, what I am thinking is they left out something...