• If you have bought, sold or gained information from our Classifieds, please donate to VMAX Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

tons of vmax parts

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tk222

Member
Joined
Feb 3, 2018
Messages
7
Reaction score
0
Location
Hamilton
I have a ton of vmax stuff that I got from a sick friend the bike has been apart for 15 years or so the parts I've got are

stamped Vmax side covers

aftermarket exhaust system

intake manifold on together and one in pieces

Valve covers

2 stators and pick ups

starter motor

aluminum side covers in nice shape

tail light

CDI box

wire harness I don't know if it's complete or not

ignition switch with a key

upper and lower engine case

2 sets of heads one head needs repairs

new Head gaskets or gasket I have to check


brake rotors

brake calipers with brake pads

tons of engine parts

some pistons

decent used cylinders

almost complete rebuilt engine my buddy told me it's about 90% complete but he can't remember what needs to be done to finish it.

2 service manuals one is on cd and the other is a book

Drive shaft

I have a few air filters they are all like new they don't even look used.



What I don't have

Seat, Forks,gas tank, Frame, wheels, rear shocks

If theres anything you need that's not listed send me a message and I will see if I have it.
 
Can you tell us the year of the bike(s) or perhaps the engine case #'s?
 
I was told that it is an 1985 but he was buying cheap vmax's at one time and stripping them down for parts he had 5 at one time in pieces.

I also have electric water pumps brand new in the box.
 
I’m looking for a foot shifter and the bolts and nuts hat the clutch and brake levers pivot on
 
I have a ton of vmax stuff that I got from a sick friend the bike has been apart for 15 years or so the parts I've got are

stamped Vmax side covers

aftermarket exhaust system

intake manifold on together and one in pieces

Valve covers

2 stators and pick ups

starter motor

aluminum side covers in nice shape

tail light

CDI box

wire harness I don't know if it's complete or not

ignition switch with a key

upper and lower engine case

2 sets of heads one head needs repairs

new Head gaskets or gasket I have to check


brake rotors

brake calipers with brake pads

tons of engine parts

some pistons

decent used cylinders

almost complete rebuilt engine my buddy told me it's about 90% complete but he can't remember what needs to be done to finish it.

2 service manuals one is on cd and the other is a book

Drive shaft

I have a few air filters they are all like new they don't even look used.



What I don't have

Seat, Forks,gas tank, Frame, wheels, rear shocks

If theres anything you need that's not listed send me a message and I will see if I have it.
Do you have a gearbox for sale, mainly after the shafts?
 
hi there
i need the picup / pulse coil .

also the stator cover and the flywheel cover / gear stick cover

and how much is the exhaust system ?
 
Back
Top