valve adjusting

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dreamster66

Well-Known Member
Joined
May 10, 2006
Messages
883
Reaction score
0
Location
Corning NY
Is there anyone on the board close to me who knows how to check the valve and adjust them if needed?
I'm in Corning NY but will travel.
I need to replace my valve cover gaskets and figured it would be a good time to check the valve clearances.
The local dealer (as with all dealers....bikes or cars) kill ya on the labor costs!
I dont expect a freebee (wouldnt turn one down tho....lol)
 
Sorry man not close but, if you have any aptitude of mechanical ability it is a pretty routine job. All you need is the basic hand tools, feeler gauge for measuring gap, and the shim tool. I use a regular screw driver (a little tedious but gets job done) to press VS buckets to swap shim if needed. Depending on last check generally you are within the +/- variant allowed but definitly worth the check. Any more help on DIY let me know I just did mine about 600 miles ago. Roy
 

Latest posts

Back
Top