valve cover wrench

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bumper

Well-Known Member
Joined
Aug 26, 2011
Messages
172
Reaction score
1
Location
Sioux Falls, SD
I got tired of trying to get at the valve cover bolts only to be able to turn them a little at a time with an Allen wrench.
So I cut a piece of Allen wrench found a ratchet wrench and pressed to sae nuts into the metric wrench. Drilled the nuts to the right size and using the vise pressed the Allen stub into the nuts. Just tried it and the next valve shim adjustment will be a lot more pleasant getting those pesky bolts out.
The ratchet can go ether way and so can the angle of the wrench.
 

Attachments

  • 14292212938121214457435.jpg
    14292212938121214457435.jpg
    44 KB · Views: 45
  • 14292213280201059691432.jpg
    14292213280201059691432.jpg
    41.2 KB · Views: 50
I used this 1 from Kobalt very strong, I use it mostly on the bike.

I had it for about 10 years maybe.
 

Attachments

  • P1090419.jpg
    P1090419.jpg
    35.3 KB · Views: 38
  • P1090420.jpg
    P1090420.jpg
    38.2 KB · Views: 32
  • P1090417.jpg
    P1090417.jpg
    34.6 KB · Views: 27
Back
Top