S smokegetsinyoureyes Active Member Joined Jul 5, 2012 Messages 34 Reaction score 0 Location Belfast Nov 2, 2014 #1 Can valve shims be ground to a certain size using a surface grinder?
one2dmax Moderator Staff member Moderator Joined Apr 6, 2006 Messages 16,965 Reaction score 1,565 Location Derby Kansas Nov 2, 2014 #2 Yes, but it's not practical for most.
wildweasel_pt Well-Known Member Joined Jan 13, 2010 Messages 2,942 Reaction score 8 Location Germany Nov 2, 2014 #3 if done with a proper machine i say yes but beware of metal temper.
S smokegetsinyoureyes Active Member Joined Jul 5, 2012 Messages 34 Reaction score 0 Location Belfast Nov 2, 2014 #4 Yes Fred, I would be worried about that, the heat from grinding could take the temper out of the pad, suppose it would depend how much of a cut you would take off each time!
Yes Fred, I would be worried about that, the heat from grinding could take the temper out of the pad, suppose it would depend how much of a cut you would take off each time!
one2dmax Moderator Staff member Moderator Joined Apr 6, 2006 Messages 16,965 Reaction score 1,565 Location Derby Kansas Nov 2, 2014 #5 You want to grind the bottom side of the shim so you should be just fine.