Vmax rear brake mount

[Zeus36]

Looking for a spare mount to use as a mock up for mounting R1 caliper adapters. The stock bracket is 15 bucks off eBay, but if someone has a spare lying around that I could borrow or get cheap, let me know. (I would return it after I'm done) Don't know if they changed over the years, but I have a 1997 model.

I'm looking to either do an inverted R1 rear caliper configuration (based on the FZ1 rotor and caliper modification Sticky on this forum - [http://www.vmaxforum.net/showthread.php?t=31997&highlight=axle+diameter] or something rotated a bit aft of the stock setup due to the adapters and rod end linkage.

This is what I'm working with:

 

[falling]

I happen to have one.


Sent from my iPhone using Tapatalk

 

[blaxmax]

Hey Zeus, have you seen this?
http://www.ebay.com/itm/322035711756?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[one2dmax]

We have standard position R1 rear caliper mounts and bottom mount versions on hand too. 280mm or 298mm versions. Not super cheap though. Got plenty of stock mounts if needed but you should be able to ebay one cheap too.

 

[TB99Max]

Hey Sean..... Curious what the R1 mounts go for? Do you do a package for the mount and caliper?

 

[one2dmax]

The mount and bar are $200 for plain billet. R1 calipers are cheap on ebay (cheaper then I would sell them). I do suggest the gold dot version since they are a much better piston/seal combination. The blue spots work just fine too.

 

[falling]

I'd definitely get one from Sean if I had it to do over. Boxxenstop sent me this POS for $200:

I ended up getting one from Exactrep, which is beautiful but no nicer than the ones Sean offers.


Sent from my iPhone using Tapatalk

 

[Zeus36]

Hey Zeus, have you seen this?
http://www.ebay.com/itm/322035711756?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

Bought one on Friday, for the money, couldn't pass on it. A new part at a swap-meet price!