yet another clutch question

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rattheroach

Well-Known Member
Joined
Nov 10, 2007
Messages
48
Reaction score
0
Location
sussex uk
hi guys, im hoping somebody can help. recently i have had to pull the clutch lever all the way back to the bars to disengage. when stationary i cannot get neutral without switching the engine off and rocking the bike back and forth. i have recently replaced the clutch plates but it happened about 500 miles later. i have replaced the clutch master cylinder but it is still the same. hope you can help. many thanks:ummm:
 
You say you replaced the clutch master cylinder, you mean on the handlebars, right?

Your problem is most likely the slave cylinder. That's the one at the other end of the line, which actuates the clutch. It's quite easy to rebuild, and you can get a kit that has all the seals to do so.
 

Latest posts

Back
Top