You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support VMAX Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
J
If it was just a plugged idle jet then I'd expect the cylinder to cut in as the revs are increased.
-
J
Our pilot jets don't like sitting idle for months with ethanol fuel. gentsvmax suggestion is a good one, especially about the...
-
J
I will try the swap. I followed the plug wire to the coil to make sure the connection was good on the plug wire also and saw the coils...
-
J
At minimum I would split the rack, get the #4 carb off and apart for a soak in the carb cleaner. The Ultra-bath is best, ultrasonic with...
-
J
I have a 98 Vmax with the #4 cylinder not firing. I have fuel, air, spark and good compression. I live in Commifornia so the gas goes...
-
Loading…
-
Loading…