1) Remove four fasteners holding vacuum chamber cover on. Be careful, spring will push the cover out.
2) Remove slide spring.
3) Remove slide. Be careful of the rubber diaphragm and notice the groove in the carb body. The slide installs one way.
4) #3 is the PAJ2. Get a flat head screwdriver that fits tight.
Mark
#1098
2) Remove slide spring.
3) Remove slide. Be careful of the rubber diaphragm and notice the groove in the carb body. The slide installs one way.
4) #3 is the PAJ2. Get a flat head screwdriver that fits tight.
Mark
#1098