works

I bought a stator from RMStator last summer, and found a discount code to get 20% off. I tried just now to enter the code to see if it works still, and it did. I paid $79.00 for a high output unit for Venture. It fit fine. It works great! One thing I did like is that the 3 output wires were...

why you should always put a coin in the freezer before you leave home. Have you ever come home from vacation, business trip or maybe a weekend away with the family - and noticed your digital clocks flashing the wrong time? You quickly realize that you had a power outage while you were away...

Hey there, I have an 06 vmax that I just rebuilt the carbs on. Also replaced the battery and the starter clutch, new plugs too. I get spark on all 4, it's not the brightest I've seen on a motorcycle but it looks sufficient. If you were me what would you check for? Any help would be...

Replaced my rusted gas tank and in the process had dropped the fender and disconnected wiring for taillights. Working on getting everything connected right but now nothing comes on when I turn the ignition. Battery is at 100%. Fuses are fine unless there are some elsewhere than the box on top...

Not for SALE Works Performance Racer Piggy back shocks Works performance can modify these shocks to the stock length of 13". Great news for me, I am keeping them. They will look great on my new 97. I just might try 13.5 inches. These shocks look brand new. I have no idea how old they...

Just finished an engine swap on my 86 and I hooked all the harness up and when I turn the key to ON the bike does nothing. Battery is fresh off the charger. Engine has fresh oil in it. No coolant or gas as I just wanted to turn it over a few times to prime the oil pump. No lights anywhere and...

OK, my '85 barnfind had very leaky fork seals,the lower legs were stained brown and the brakes were gummy with oil. I saw a Utube vid about making and using a tool made from hard clear plastic packaging along with the methods of use. So I tried it while I had the front wheel off. I found...

vboost works sometimes,if i squeeze the motor it will work for awhile, can this be repaired or do i need to replace it?. Thanks, Gary

I bought a 91 that had sat for a while.got it running great 18000 miles.now the vboost cycles every now and then.it always cycles when i tap on the control box, but dont know if it works right while riding.removing the side cover is getting old.would it hurt anything if i unplug the vboost when...

i am trying to find a suitable way of uprating my max headlight,it has the double relay mod .however the beam patten is useless on either dip or main,tried another yam reflector from a virago ,just the same.i ride on back roads & every car coming towards me has superbright lights,they dont...

Wow, i can actually use the site again.Cool!!!:clapping:

Speed Limit Enforced by Aircraft! A Must See and Share

So, bare with me guys, im new to the max....so there i was trying to figure out what was wrong with my bike...it wouldnt start...just heard a click from the cdi box...also, i did not hear the pump turn on when i turned the key and i figured it out the click...the ground from the cdi box to the...

The monkey bit me again! Just ordered a pair of Works Pro Racer Shocks. Threaded preload adjuster, fully adjustable compression and rebound damping and even ride height adjustment. All built to my specifics (weight, passenger, riding ability, etc). Will be ready in about 3 weeks. Can't wait!!!

Just got my Works Performance custom shocks!! Super excited to try these out. was Looking for reviews but couldn't really find any... I am dropping them off in the morning and hopefully be taking it on a nice 300 miles ride round trip at 80+. Will give yall my review after they ride. I'll go...

Looks like we are now an approved works shocks dealer. Not as good a pricing as I get on the progressives but at least I can offer another product to you guys! Sean

Look we have a really dated master cylinder set up that needs serious updating... I was looking into the vrod masters,,they are sharp,,but not sure if they will fit the lines without some serious adapters...Anyone have any other good ideas for nice looking masters??

I'm trying to get the bike back together this weekend and running but the starter butting won't start it! The relay clicks and everything but doesnt engage the starter. I took the connections off, cleaned then, and put them back on and still no go but if I jump between the 2 connectors the...

Not sure if anyone is interested but there is a set of works performance shocks on e-bay with 3 hrs left setting at $103. Are the shocks anygood ...

I know, I know, I should work on my own, but I'm not too keen on bike inner-workings and my new job nets me one, MAYBE two days off a month. Also have a car project in the garage and one in the driveway waiting in line! Any info on a trustworthy and reasonable bike mechanic in the QC area would...