´85 VBOOST KIT installation on ´86

[gavicool]

Hello;
The last owner remove the VBoost in my bike,a 1986 model that I would like to put back as original as possible(specilally regarding to take care of carburator in the future,and without the Vboost is almost impossible to siynchronize then ....),and looking around I found out a Vboost with the carburator manifolds(including the rubber boots , the botton orings and cable) for a good price,but the problem is that came from a ´85 unit..Is it any problem to installed on my bike?I ´ve read that the 85 model has the vboost tubes smaller ,from ´86 and newer had bigger diameter and stay there...
Please,cuould you help me with matter?Any problem with the performance of the bike or the control box/electric motor....
Thank you very much for your help.

 

[desert_max]

There is certainly no compatibility issue, worst case you may have to tune around it somewhat. Best case, you’ll install it, run it and be happy as a clam.

 

[gavicool]

There is certainly no compatibility issue, worst case you may have to tune around it somewhat. Best case, you’ll install it, run it and be happy as a clam.

;-) ;-) great!!..thank you..