carb question

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JimBE

New Member
Joined
Nov 19, 2022
Messages
4
Reaction score
1
Location
Belgium
Hi Guys still pretty new here,after further inspection on my vmax i saw a little bit of gas on 1 carb,see attached picture.
Small edit ,after some research here i found that its the drainage screw and some guys suggest to teflon it?

Can i just unscrew this without doing anything else on the bike and teflon it / screw it back in or would i be causing more damage?


315224582_506931481196283_7391242936042169116_n.jpg
 
Last edited:
Hi Guys still pretty new here,after further inspection on my vmax i saw a little bit of gas on 1 carb,see attached picture.
Small edit ,after some research here i found that its the drainage screw and some guys suggest to teflon it?

Can i just unscrew this without doing anything else on the bike and teflon it / screw it back in or would i be causing more damage?


View attachment 86833
That screw has an oring on it . It is the drain screw for the carb just pull it out and replace it with a good quality oring.
 

Latest posts

Back
Top