Front brake sight glass

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

curtmixon76

Member
Joined
Mar 8, 2016
Messages
7
Reaction score
0
Location
North Augusta South Carolina
Please help me, my sight glass is old and seeping brake fluid.
Is there a cure or fix for this?
I looked for just a glass, and came up empty.
I tried to search the threads but I couldn't pull up the search box, so if I'm in the wrong place help me out
 
You can go to your local jeweler and get a watch crystal, or there are plastic ones online for your use. You can easily remove the old one (save the shiny pieces for re-use), use a good line of epoxy around the perimeter, and that should do it. Some people use a hard-set liquid gasket sealer. There's no real pressure on it. Just make sure the stuff is compatible w/brake fluid.

The 'squid' way was to use a dime, 10 cents for the window, no visual, but hey, lookit the cost!

A thread: http://www.vmaxforum.net/showthread.php?t=11538&highlight=master+cylinder+window+replacement
 
I got one off eBay it worked great I forget the vendor name but the part is available I used RTV per instructions to install over two years ago I think the part was $15 later Dwayne
 
Back
Top