Replacement fuel pump bracket swap pt1.

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

3-Max

Well-Known Member
Joined
Sep 3, 2022
Messages
108
Reaction score
33
Location
UK
My old fuel pump went - click,click,click,click,click :(
New fuel pump goes Brrrr,r,r,r :)

If you've looked for a replacement Gen1 fuel pump recently (Sept 2022) then you'll most certainly have seen this beastie on fleabay & the like. This one cost me £23.

(Ed.: click on each pic to see a high-resolution enlargement)

GEDC2234.JPG

Says if for VMX12... etc but clearly all wrong. Well only partly - the pipes are wrong & so's the bracket But the pump is actually the same. Mine arrived with the correct electrical connector (& full of petrol to keep things from drying out). The good news is all you have to do is swap out the wrong bits for the right bits from your old pump. No mods needed & can be swapped back if necessary.

1st here's what's inside (old pump).
The points (cabled end):
GEDC2174.JPGGEDC2175.JPGGEDC2176.JPG

Then the in/oulet end :
GEDC2180.JPGGEDC2179.JPGGEDC2178.JPGGEDC2177.JPG

As I'm only allowed 10 pictures the swapping method is in part 2. See ya there.
 
Last edited by a moderator:

Latest posts

Back
Top