Search results

My guess is you had a little too much fun in college :punk:I don't recall that on the tach.But atleast you remember all the fun you had don't you?? ha ha !!

# 2343 has 14000 miles on it kerker exhaust and k&n runs perfect!!:punk:

Well at present I am looking locally for a nice neat small resistor but currently no luck.I found one guy but his price was a tad bit silly 12.00 canadian per I can get radio shack "cement block" resistor but that is just plain ugly!!! So far money vs. effort Gannon's harness are the way to go...

Thanks again I'm sure I will get it built just fine as I'm not a fan of fire or burnt parts for that matter!! lol!!! :eusa_dance:

Thank You very much for the "hints" Gannon.I would not expect you being the person who makes the plug and play harnesses and sells them (at a very fair price) to give up all of your info.I'm simply asking a question no worries at all.I am a Transmission Tech by trade and if someone walked in to...

Hey guys my vmax is an 85.I have a question or 2 first what is the resistor value needed I assume this will go inline on the hot side (positive)??and second what is the hot side on the denso cop??? I looked all over it and no signs of + or - I have the service manual for the vmax so no worries...

Ok maybe not as hard as I thought it would be lol!! I believe the vmax end of the pigtail is called US2WW or A2AS found them at kojaycat or corsa technic site.Can someone verify these are right??? thxs guys.This with the piles of info on this site about cops for those of us who enjoy building...

Hey guys I have denso cops I purchased from ebay.I know there is a member on this site that sells plug and play harnesses for 70-80ish bucks i think but if your like me I enjoy building and researching my own stuff when possible.So with the help of the net I can tell u the denso pigtail end of...

Thanks guys great idea I went to a local led bulb shop they gave me 74x replacement led wedge style try to get out the the garage soon all put them in thxs again.

Hey guys looking for the aftermarket part # for these bulbs neutral,turn,high beam,etc they are 12 volt 3 watt.I believe T10 is the part # but only a guess looking in the electrial section but either blind or no dice info not there.Yamaha part # is 42X-83517-00-00 if that helps looked on the net...

Rawarrior thx for the reply on the wiring I figured it is was same as the Yamaha r/r but figured it was worth it to ask ThX again !!:punk:

Well I took my battery to work with me today and load tested it.It is fine (I think I got luck lol) so I will use this battery still.I have seen a couple off times on atvs where for r/r was cracked/overheated and the battery not blown but the acid levels very low (boiled).Actually come to think...

RaWarrior just so I am clear in the black connector the + output is the one close to the gray connector just like the R1 or are you saying that + output is at the other end of the black connector.I believe that all FH011AA r/r 's are same correct??? :confused2:The FH011AA r/r is in so many...

thx for the info about the ninja r/r on ebay as we speak:punk:

I was thinking of going threw the 30amp main fuse with larger wire of coarse :punk:Everything else has been checked did the crimp mod today and stator checked out at .45ohm per all 3 three wires and the battery is on the battery tender as we speak and seems to be coming back up nicely so I...

Well started out for a ride today nice sunny day but I guess it wasn't in the cards for a ride.About 6 km's from home idling at the lights rough idle starts then stalled tried start it back up but the battery was to weak :damn angry:.Call father-law for the trailer push the bike up on it.Time to...

my bike also runs like crap when my tach died what I did was pulled the tach/temp assembly out and used my heat gun on the circuit board slowly worked it back and forth for about 3 minutes or so let it cool for about 1/2 hour put to all back together and problem solved.I was told solder joints...

I also thought 373rpm for 10 mph is correct.With the new info that Mr.Piclkle tire was not stock I believe the correct ratio is 2240:60 . I think I will take my chances and order a speedo based on this ratio Thanks again for the info and help.:clapping:

thanks guys for the info I did some more research and found that is has to be 2240:60 or 2:1 Mr.Pickle said 2240:60 was 10mph fast but 2:1 would only slow the cable down 240 rpm so is 240 rpm worth 10mph:ummm::ummm:.I assume most people say screw it and go electric this is kinda p.i.t.a to...

Would someone know the ratio I believe it is 2240:60 (2240 rpm cable is 60mph).But it gets a little confusing doing a search a the net some info said only 19" and 21" wheel use the ratio other info said all japanese use this ratio.Well I have a 18" stock front rim so kinda confused :ummm::bang...