carb

Stainless allen head diaphragm screws $ 10 a set plus pay pal fees shipping included in the lower 48 . Please email instead of PM [email protected]

1985 Vmax Canadian version so it has the stock adjustable needles. Everything is stock. Well not exactly. The exhaust has been punched out to get a better sounding max. I took the carbs off last winter and cleaned them all out. Every passage and jet was cleaned with seafoam and air blown...

Been watching peashooter carb cleaning vid on youtube,i can't seem to find B-12 chemitool in the UK.Is there an alternative or will I have to pay postage from the USA.My carbs really need cleaning and synchronising,it starts fine and ticks over but runs a bit rough.When the carbs are sorted it's...

Ok, I'm gonna buy a sniffer to tune, really tired of guesswork besides I'm on top of picking up a Venture which will no doubt need a good optimizing. I called Innovate sales dept to ask a few questions and got some interesting information. Luckily I got a cool sales rep that gave me some...

It is spitting fuel out the breather. Pipes are not new. High flow air intake mod. It is reversion, to the best of my knowledge. Carb has been rebuilt. Suggestions please before I Ebay it piece by piece!

Do y'all appreciate the ease of carb syncing on our V-Max? I certainly do. Everything is so quick and accessible! My first carb sync was on a 1981 Honda CB900F. I followed the manual... Step 1: Loosen the rear fender and move back Step 2: Loosen battery box and move back Step 3: Remove air...

Is there a carb rebuider in Nashville Tn or nearby?

Have Chrome Carb Intake covers?

Hey guys I was told to come over here from a Facebook post that I put out. I am looking for a Vmax carb guy around the Detroit area I live about 40 miles north of there. If you can help please let me know thanks. Sent from my iPhone using Tapatalk

looking for the carb model number or code

Have a broken ear on one of my carbs. What years are compatible with the 98? Thanks in advance...

I traded my 86 max for a 2003 with 8k miles on it. It ran strong til I came to a stop at my house where it stumbled and stalled. I decided to look at the carbs and saw this thing poking out when I pulled the needle out. How do I get this jet in? It doesn't seem to want to screw in....

When I throttle over 1/4 to 1/3 and the bike is under 2500 rpm it will stumble and almost make a tst tst tst sound while giving zero power beyond the amount it starts to stumble at. I've also noticed that it will do the tst tst sound when i go past about 1/3 choke. Any idea what it could be?

What is correct sized tool for removing Carb Inlet Manifold Cover screws ?

I found an archived article related to carb tuning for people in Denver, however it appears to be for stock exhaust setups. I have a single K&N filter and UFO 4-2-1, I upped my main jets to 155 after putting the exhaust on. Does anyone have modification suggestions based on this document for...

I am still fighting an overall low vacuum problem on my 1986 Venture. However I have it running what seems to be good. Synced the carbs using a few pieces of 24 gauge wire in the throttle plates. Then of course curiosity reared its head. Could my main needles be affecting the idle circuits...

Anyone have any tricks of the trade as to how to get the diaphramsto stay:bang head: in their grooves? Only 2 hands and i have tried stretching but have only 1 in place. No suction on the other 3.

Long story short: Bike has been stored wet for the last year (seafoam and StaBil with fresh gas). When started, the bike starts and will idle on the choke as long as I keep the RPM above about 1500. Below that, it stalls out. Regardless of the choke setting or RPM if I so much as touch the...

I put my carbs back on after adjusting the float levels, went to start the bike, and gas was pouring out the right rear carb. I checked the screws and one was very loose. Turns out I must have over tightened it and snapped off the bottom corner of the carb. Anyone have any ideas on a fix? Or a...

I did this write up so that if I ever need to do again, it’ll be available. My 1989 VMAX wouldn’t run anywhere near idle without choke starter. After several partial clean attempts, I gave up, totally removed carburetors, and rebuilt. This is a summary of parts of the rebuild that I hope...